The TwinCAT 2 Base components consist of runtime systems for real-time execution of control programs and development environments for programming, configuration, and diagnostics:
- TwinCAT I/O: versatile I/O interface for all common fieldbuses
- TwinCAT PLC: enables programming of up to four PLC runtimes on a single PC. The PLC program can optionally be written in one or several IEC 61131-3 languages (IL, LD, FBD, SFC, ST) or CFC.
- TwinCAT NC: enables simultaneous positioning of many axes. The levels NC PTP (point-to-point positioning), NC I (linear and circular interpolating movements of axis groups with up to eight drives) and CNC (extension of NC I with conventional CNC features for up to 32 interpolating axes per channel) are available for this purpose.
With the supplement products, functions from the system, motion, communication, controller, and building automation areas can be added to individual TwinCAT 2 Base components.
- Reset all filter values
- Results: 57
TX1000 | TwinCAT CP
- Description:
- license for using the driver for the Beckhoff Control Panel, providing communication with general Windows programs
TX1100 | TwinCAT I/O
- Description:
- license for using the I/O DLL for data exchange with Windows programs
TX1200 | TwinCAT PLC
- Description:
- license for using the IEC 61131-3 PLC automation software, including programming software and runtime system
TX1250 | TwinCAT NC PTP
- Description:
- license for using the PTP positioning software with integrated IEC 61131-3 TwinCAT PLC, contains programming software and runtime system
TX1260 | TwinCAT NC I
- Description:
- license for using the interpolation and PTP positioning software with integrated IEC 61131-3 TwinCAT PLC, contains programming software and runtime system
TX1270 | TwinCAT CNC
- Description:
- license for using the CNC path control software based on TwinCAT PLC or TwinCAT NC PTP
TS1500 | TwinCAT Valve Diagram Editor
- Description:
- graphical tool for designing the characteristic curve of a hydraulic valve
TS3900 | TwinCAT Solar Position Algorithm
- Description:
- license for using the PLC library TwinCAT Solar Position Algorithm
TS4100 | TwinCAT PLC Controller Toolbox
- Description:
- license for using the PLC library TwinCAT Controller Toolbox
TS4110 | TwinCAT PLC Temperature Controller
- Description:
- IEC 61131-3 software library for TwinCAT PLC for temperature control
TS5050 | TwinCAT NC Camming
- Description:
- IEC 61131-3 software library for TwinCAT PLC, implements camshaft functions (table coupling)
TS5055 | TwinCAT NC Flying Saw
- Description:
- IEC 61131-3 software library for TwinCAT, realizes a “flying saw”
TS5060 | TwinCAT NC FIFO Axes
- Description:
- IEC 61131-3 software library for TwinCAT, permits a specified FIFO set value generation
TS5065 | TwinCAT PLC Motion Control XFC
- Description:
- license for using the PLC library TwinCAT PLC Motion Control XFC
TS511x | TwinCAT Kinematic Transformation
- Description:
- license for using the TwinCAT PLC library for the realization of different kinematic transformations for TwinCAT PTP or TwinCAT NC I
TS5210 | TwinCAT CNC E
- Description:
- license for using the CNC path control software based on TwinCAT PLC or TwinCAT NC PTP
TS5220 | TwinCAT CNC Axes Pack
- Description:
- expansion to a total of 64 axes/controlled spindles, of which a maximum of 32 can be path axes and a maximum of 12 can be controlled spindles
TS5230 | TwinCAT CNC Channel Pack
- Description:
- 1 further CNC channel, expandable to a maximum of 12 channels, channel synchronization, axis transfer between channels
TS5240 | TwinCAT CNC Transformation
- Description:
- transformation functionality (5-axis functionality), kinematics selection from kinematics library, RTCP function, TLC function, definition of various coordinate systems, linking/transition of coordinate systems
TS5250 | TwinCAT CNC HSC
- Description:
- velocity and acceleration control across blocks for optimum utilization of axis dynamics for higher path velocities, maximum surface quality through smoothed dynamics, control of specified contour tolerances
TS5260 | TwinCAT CNC Spline Interpolation
- Description:
- path programming via splines with programmable spline type, Akima spline, B-spline
