EL1052 | EtherCAT Terminal, 2-channel digital input, NAMUR
+24 V
EL1052 | EtherCAT Terminal, 2-channel digital input, NAMUR
The EL1052 digital input terminal acquires signals from NAMUR sensors according to IEC 60947-5-6. The sensors are supplied with a voltage of 8.2 V and return a diagnosable current signal. In this way, a wire breakage or short-circuit can be detected in addition to the switching state. The LEDs indicate signal or any error states, channel by channel.
The most widely used NAMUR sensors are proximity switches, which are used, for example, as limit switches in control valves. In principle, both normally open (NO) and normally closed (NC) contacts can be operated with the EL105x. Any inversion of the status bits must be taken into account.
Product status:
regular delivery
Product information
| Technical data | EL1052 |
|---|---|
| Technology | NAMUR |
| Connection technology | 2-wire |
| Specification | NAMUR DC switching amplifier (IEC 60947-5-6) |
| Signal type | binary, current input for NAMUR sensors |
| Number of inputs | 2 |
| Open circuit voltage | typ. 8.2 V DC |
| “0” signal current | ≤ 1.2 mA |
| “1” signal current | ≥ 2.1 mA |
| Switching hysteresis | typ. 350 µA |
| Short-circuit current | typ. 7.8 mA |
| Fault detection | I ≤ 200 µA (cable break), I ≥ 7.0 mA (short circuit) |
| Max. switching frequency | 5 kHz (duty factor 50 %) |
| Internal resistance | according to I/V curve IEC 60947-5-6 |
| Distributed clocks | – |
| Supply voltage electronics | 24 V DC (via power contacts) |
| Current consumption power contacts | typ. 20 mA + load |
| Current consumption E-bus | typ. 40 mA |
| Electrical isolation | 500 V (E-bus/field potential) |
| Special features | integrated reverse polarity protection |
| Weight | approx. 60 g |
| Operating/storage temperature | -25…+60°C/-40…+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Pluggable wiring | for all ESxxxx terminals |
| Approvals/markings | CE, UL, ATEX, IECEx, cFMus |
| Ex marking | ATEX: II 3 G Ex ec IIC T4 Gc IECEx: Ex ec IIC T4 Gc cFMus: Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx ec IIC T4 Gc |
| Housing data | EL-12-8pin | ES-12-8pin |
|---|---|---|
| Design form | compact terminal housing with signal LEDs | terminal housing with pluggable wiring level |
| Material | polycarbonate | |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm | |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock | |
| Side by side mounting by means of | double slot and key connection | |
| Marking | labeling of the BZxxx series | |
| Wiring | solid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver | |
| Connection cross-section | s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² | s*: 0.08…1.5 mm², st*: 0.08…1.5 mm², f*: 0.14…1.5 mm² |
| Connection cross-section AWG | s*: AWG28…14, st*: AWG28…14, f*: AWG26…16 | s*: AWG28…16, st*: AWG28…16, f*: AWG26…16 |
| Stripping length | 8…9 mm | 9…10 mm |
| Current load power contacts | Imax: 10 A | |
*s: solid wire; st: stranded wire; f: with ferrule
| Ordering information | |
|---|---|
| EL1052 | EtherCAT Terminal, 2-channel digital input, NAMUR |
| ES1052 | EtherCAT Terminal, 2-channel digital input, NAMUR, pluggable wiring |
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use